# How to Prepare Your Logo for T-Shirt Printing & Embroidery (File Guide)

Source: https://groovstation.com/groov-blog/how-to-prepare-logo-files-for-printing-and-embroidery/
Published: 2026-09-20 · Updated: 2026-11-02 · Author: Groov Station team

**Quick answer:** Send your logo as a vector file (AI, SVG, EPS or PDF) with Pantone colours. PNG works for mockups at 300 DPI or larger. For embroidery, we digitise your logo; avoid fine detail below 1 mm.

The single biggest factor in how your logo looks on a t-shirt, polo or cap is not the printer or the machine — it is the file you send. We see the same avoidable issues again and again: a logo screenshotted from a website, a PNG that is too small, colours that do not match the brand book, text so thin it disappears on fabric. This guide to **preparing logo files for t-shirt printing and embroidery** explains the formats we prefer, how to check your artwork and what we do when only a low-quality file exists.

## Vector vs raster: the basic difference

[Vector files](https://en.wikipedia.org/wiki/Vector_graphics) (AI, EPS, SVG, PDF) describe shapes mathematically, so they can be scaled to any size without losing sharpness. [Raster files](https://en.wikipedia.org/wiki/Raster_graphics) (PNG, JPG) are made of pixels and become blurry when enlarged. For production we strongly prefer vector files; raster files are acceptable for mockups if they are large and clean.

## Formats we accept, in order of preference

| Format | Type | Use |
| --- | --- | --- |
| AI, EPS | Vector | Best for all methods |
| SVG, PDF (vector) | Vector | Excellent |
| PNG with transparent background (2000 px+) | Raster | Good for mockups and DTF |
| JPG | Raster | Last resort; we recreate the logo |

## Checklist before you send

- **Use the original file** from your brand designer or brand book.

- **Include colour codes** (Pantone, CMYK or hex) so we can match.

- **Provide all variants:** full-colour, one-colour, white and black versions.

- **Convert text to outlines** or include the font files.

- **State the intended size** and placement (for example, 9 cm on the left chest).

## Preparing artwork for embroidery

Embroidery converts your logo into a stitch file — a process called digitising. Because thread has thickness, some details do not translate:

- **Minimum text height:** about 5–6 mm; smaller text blurs.

- **Thin lines:** lines below roughly 1 mm may not stitch cleanly.

- **Gradients:** become flat colours; choose a few solid shades.

- **Colour count:** keep to about 6–8 thread colours.

- **Small gaps:** narrow spaces between elements may fill in.

We digitise your logo, make a stitch-out sample for approval and store the file for repeat orders so every batch matches. See our [polo t-shirts](/products/polo-tshirts/) for more on embroidery.

## Preparing artwork for screen printing

- Each colour is a separate screen, so limit colours and provide separations if possible.

- Avoid very fine lines and tiny halftone dots.

- Provide a version of the logo that works on both light and dark garments.

## Preparing artwork for DTF and sublimation

DTF handles gradients and fine detail but needs high-resolution files — at least 300 DPI at print size. Sublimation needs full-bleed artwork matched to the garment pattern; we provide a template. Learn how methods compare in [embroidery vs screen printing vs DTF](/groov-blog/embroidery-vs-screen-printing-vs-dtf/).

## Colour matching

Screens vary, so a colour on your monitor may not match on fabric. Provide a [Pantone](https://www.pantone.com/) reference for brand-critical colours and tell us the fabric colour; the same ink looks different on white and on black cotton. For large orders we can dye fabric to match or print a colour swatch for approval.

## What if I only have a low-quality file?

It happens often, especially for older brands. Send what you have; our design team can recreate your logo as clean vector artwork for production. We will always show you the recreated version for approval before printing.

## Common mistakes

- Sending a screenshot from a website or social profile.

- A logo with a white box background.

- Different versions of the logo across files.

- Forgetting to mention the size, so it prints too large or too small.

## Sizing guide

| Placement | Typical width |
| --- | --- |
| Left-chest logo | 8–10 cm |
| Centre-chest graphic | 20–28 cm |
| Back print | 25–32 cm |
| Sleeve or cap | 5–7 cm |

## Send us your artwork

Upload your logo through our [contact page](/contact-us/) or WhatsApp us and we will return a free mockup in 24 hours. For more, read the [bulk ordering guide](/groov-blog/how-to-order-custom-corporate-tshirts-in-bulk/), and explore [corporate t-shirts](/products/corporate-tshirts/).

## A one-minute file check

- Open the file and zoom in to 400%. Edges still sharp? Good sign of a vector or high-resolution file.

- Check the background: transparent, not a white box.

- Confirm the colours match your brand book.

- Make sure text is outlined or fonts are included.

- Export one-colour, white and black versions.

If any step fails, forward the file anyway and tell us — it is faster to fix with us than to guess.

## FAQs

**Can you work from a JPG?**
For mockups yes; for final production we recreate it as vector.

**What file format is best?**
Vector formats such as AI, EPS, SVG or vector PDF.

**How small can text be on embroidery?**
About 5–6 mm in height.

**Do you store my embroidery file?**
Yes, so repeat orders match exactly.

