
Medical staff work long shifts on their feet, in conditions that demand hygiene, comfort and instant identification. A good set of scrubs is not just clothing — it is part of how a hospital runs. This hospital scrubs guide covers fabric choices, fit, anti-microbial finishes and department colour-coding, drawing on our experience delivering 500 custom scrubs and lab coats to a medical-technology client in about three weeks.
What hospital uniforms must handle
- Hot washing at high temperatures and frequent laundering.
- Long wear of 8–12 hours with movement, bending and lifting.
- Hygiene expectations and easy stain release.
- Identification by role and department for patients and staff.
Fabric options for scrubs and coats
| Fabric | Strengths | Best for |
|---|---|---|
| Poly-cotton (about 65/35) | Durable, economical, easy care | Ward staff, housekeeping |
| 4-way stretch scrub fabric | Comfort and freedom of movement | Surgeons, nurses, OT teams |
| Cotton twill | Breathable, classic structure | Lab coats, doctor coats |
| Anti-microbial finish | Helps limit odour-causing bacteria on fabric | High-contact areas |
Anti-microbial finishes do not replace laundering and infection-control practice; they are an additional layer. For authoritative guidance on infection prevention, hospitals follow guidance from bodies such as the World Health Organization and national health authorities.
Colour-coding by department
Colour-coding speeds identification and helps patients understand who is who. A common scheme is:
| Department | Typical colour |
|---|---|
| Operating theatre | Green |
| ICU | Navy |
| Ward nursing | Ceil blue |
| Doctors (lab coats) | White |
| Admin and front desk | Maroon or grey |
| Housekeeping | Teal or grey |
Document the scheme, keep Pantone or swatch references and ensure reorders match exactly. We maintain specifications so replenishment orders are consistent.
Fit, pockets and function
- Separate cuts for men and women with a wide size range.
- V-neck tops with 2–3 pockets, including a device pocket.
- Drawstring plus elastic waist pants with side and cargo pockets.
- Lab coats with an inner pocket, hidden buttons if required and embroidered name and designation.
Branding and identification
Embroider the hospital logo on the chest or sleeve, and add names and designations so patients can identify staff. Keep logo sizes modest; legibility matters more than size. Digitise once and reuse the file.
Laundry and lifespan
Hospital uniforms face hot-wash cycles. We test shrinkage and colour loss at high temperatures and recommend two to three sets per staff member so garments rotate and last longer. Plan a replenishment programme to match staff turnover, rather than ordering everything at once every few years.
Planning a hospital uniform order
- List roles, departments and headcount.
- Choose fabrics and colours; approve samples on staff.
- Collect sizes; use size charts per role.
- Agree delivery batches and a replenishment plan.
Next steps
See our hospital and medical uniforms page for specifications, the institutional uniform guide and our hospitality uniforms for non-clinical staff. Share your requirement through our contact page for a free mockup and quote.
Lessons from a rush hospital order
When a medical-technology client needed 500 scrubs and lab coats on a tight schedule, the order succeeded for three reasons that apply to any hospital uniform project. First, decisions were made in one round: a single approver signed off fabric, colour and logo placement, so there was no back-and-forth between departments. Second, sizes were collected before production, using a simple form with a size chart, so we did not guess. Third, delivery was staged — the first batch reached the most urgent wards first, the rest followed. Delivery came about three weeks after approval.
If your hospital is planning a similar project, the practical takeaway is to appoint one decision-maker, circulate sizes early and agree delivery batches in advance. We are happy to prepare a one-page specification sheet you can use internally, covering fabric, colour references, logo placement and size-split by role, so everyone works from the same document.
Questions to ask before you choose a medical uniform supplier
- Can you provide fabric swatches and a wash-tested sample?
- How do you keep department colours consistent between batches?
- What is the replenishment lead time when staff numbers change?
- Can you embroider names and designations in small batches?
FAQs
How many scrub sets per staff member?
Two to three sets per person to rotate with laundry.
Are anti-microbial fabrics necessary?
They are an extra layer of hygiene, not a replacement for infection-control practice.
Can scrubs be colour-coded by department?
Yes — we plan colour-coding per department and keep references for reorders.
How fast can you deliver 500 scrubs?
We delivered 500 custom scrubs and lab coats to a client in about three weeks.